News
Troubleshooting Phantom Voltages & VFD Interference: How LoZ and LPF Modes Save You Time
A digital multimeter can show voltage on a disconnected conductor, even when that wire is not connected to an energized source. And when you measure a variable frequency drive (VFD),
Equipment Tripping on Startup? How to Measure Inrush Current Accurately
A motor starts, the lights flicker, and the circuit breaker trips—even though the equipment’s running current looks normal. For HVAC technicians and industrial maintenance teams, this can be a frustrating
How to Choose the Right Solar Panel Tester MPPT Meter for Your PV System
Choosing a solar panel tester starts with three electrical limits: power, voltage and current. All three must suit the module or circuit you intend to test. A higher wattage figure
Solar Panel Troubleshooting with an MPPT Meter: 7 Common PV Problems and Solutions
A solar panel producing less power than expected is not necessarily faulty. Changing sunlight, high cell temperature, shading and dirty surfaces can all reduce output. Loose connections or internal module
Solar Panel Tester MPPT Meter: How to Test a Solar Panel’s Actual Output Power
A solar panel can show a normal voltage reading and still deliver less power than expected. For anyone checking a new module, comparing existing panels or investigating low output, voltage
How to Choose a Power Clamp Meter for Three-Phase Circuits
Three-phase power measurement trips up a lot of electricians and maintenance engineers the first time they try it — not because the theory is hard, but because not every clamp
Why HK32T Pocket Multimeter Is the Best First Multimeter for Beginners
About the Author Li Wei — Product Manager at Honeytek, 9 years in test & measurement instrumentation. Has designed product training programs for over 200 distributor technicians and personally field-tested multimeters
HK33 Series Professional Auto-Ranging Multimeter: In-Depth Review for Electricians
About the Author Chen Wei — Senior Electrical Engineer at Honeytek, IEC 61010 certified. 14 years of experience in digital multimeter calibration, electrical safety compliance, and product quality assurance. Has personally
How to Check If a Wire Is Live Before Replacing a Light Fixture
Before replacing a light fixture, turn off the correct breaker, test your voltage detector on a known live source, check every wire in the fixture box, and confirm uncertain results
CAT III 300V vs CAT III 600V: How to Choose a Voltage Detector
CAT III 300V and CAT III 600V describe where a voltage detector can be used and the maximum rated voltage level within that measurement category. CAT III 600V offers a
Why Does a Voltage Tester Pen Give False Positives?
A voltage tester pen can give a false positive because it is designed to sense an electric field, not always to measure usable voltage directly. Nearby live wires, induced voltage,
HK820 vs HK820+ vs HK880A Digital Anemometer: Key Differences
Choosing the right digital anemometer can make airflow testing faster, easier, and more reliable. The HK820, HK820+, and HK880A are handheld air velocity meters designed for measuring wind speed, air